You too can help reduce carbon emissions!
An average clothes dryer releases approximately 1.2 tons of carbon into the atmosphere every year. There are about 90 million dryers in the U.S. alone.
Drying clothes with modern day electric and gas appliances produces roughly 108
tons of CO2 carbon emissions annually.
Hang E Dry, available in multiple sizes & aesthetically pleasing colors, provides the opportunity to embrace air drying practices in more locations than ever before, patios, balconies, pool side decks, roof tops, backyards, condos,
strata's, apartment blocks, cabins cottages, resorts, hotels and many more.
Hang E Dry is manufactured in the USA using high quality PVC tubing and UV resistant polyester rope. Your Hang E dry is the last clothes drying rack you will ever need.
Contents:
A: 4 x Horizontal rails (front and back)
B: 4 x Vertical posts
C: 2 x Base side rails
D: 2 x Top side rails (with holes)
E: Corner joints
F: Rope stop
G: 1/8” Polyester Rope
H: HangEDry Label
Assemble all the components as shown in the illustration.
Installation
Installing the Hanging Rope: The process of installing the rope goes from side to side advancing one hole on each return.
Begin by feeding the rope through the front hole on the outside of (D) left side rail. Pull the rope all the way through until the stopper touches the outside of the rail. Then feed the rope through the corresponding hole on the inside of (D) opposite side right rail. Each time you pass through a hole pull all the rope through. Then advance to the next hole on the right and pull all the rope through the hole and do the same on the corresponding hole on the left.
Repeat going from side to side and advancing one hole on each pass. After you have completed all the holes, pull the rope snug (best done by working your way row by row from the front to the back taking up the slack. Install the cable stop and
You are good to go!
